Headlamp Switch: Service and Repair

Headlamp Switch

Fusion/Milan









MKZ









Removal and Installation

1. Remove the instrument panel side finish panel.

2. NOTE: The headlamp switch bezel is removed by pushing from behind.

Release the tabs and remove the headlamp switch and bezel assembly.

- Disconnect the electrical connector.

3. NOTE: The 3 retaining tabs on the headlamp switch are located at approximately the 3, 6 and 11 o'clock positions when viewed from the front.

Release the tabs and separate the headlamp switch from the bezel.

4. To install, reverse the removal procedure.