100000 MI or 160000 KM

Inspect
    Wheels
      Inspect the wheels and related components for abnormal noise, wear, looseness or drag.
    Vehicle
      Multi-point inspection - Recommended
    Universal Joint, Drive/Propeller Shaft
      Inspect and lubricate driveshaft and U-joints if equipped with grease fittings.
    Tie Rod End
      Inspect and lubricate tie-rod ends if equipped with grease fittings.
    Steering and Suspension
      Inspect and lubricate steering linkage and suspension if equipped with grease fittings.
    Fluid - A/T
      Inspect automatic transmission fluid level (if equipped with a dip stick).
    Exhaust System
      Inspect exhaust system and heat shields.
    Drive Belt
      Inspect accessory drive belt(s).
    Cooling System
      Inspect engine cooling system for strength, and hoses.
    Constant Velocity Joint Boot
      Inspect half-shaft boots (if equipped).
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses and parking brake.
    Ball Joint
      Inspect and lubricate ball joints if equipped with grease fittings.
Replace
    Spark Plug
      Replace spark plugs.
    Oil Filter, Engine
      Replace engine oil filter.
    Engine Oil
      Replace engine oil.
    Coolant
      Replace engine coolant.
    Cabin Air Filter / Purifier
      Replace cabin air filter (If equipped)
Rotate
    Tires
      Rotate tires, inspect tire wear and measure tread depth.