150000 MI or 240000 KM

Inspect
    Wheels
      Inspect the wheels and related components for abnormal noise, wear, looseness or drag.
    Vehicle
      Perform multi-point inspection - Recommended
    Universal Joint, Drive/Propeller Shaft
      Inspect and lubricate driveshaft and U-joints if equipped with grease fittings.
    Tie Rod End
      Inspect and lubricate tie-rod ends if equipped with grease fittings.
    Steering and Suspension
      Inspect and lubricate steering linkage and suspension if equipped with grease fittings.
    Exhaust System
      Inspect exhaust system and heat shields.
    Cooling System
      Inspect engine cooling system for strength, and hoses.
    Constant Velocity Joint Boot
      Inspect half-shaft boots (if equipped)
    Cabin Air Filter / Purifier
      Inspect cabin air filter (if equipped)
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses and parking brake.
    Ball Joint
      Inspect and lubricate ball joints if equipped with grease fittings.
Replace
    Oil Filter, Engine
      Replace engine oil filter.
    Fluid Filter - A/T
      Replace automatic transmission fluid filter (filter not required on 6F35, 6F50, DPS6 and awf-21 transmissions).
    Fluid - A/T
      Replace automatic transmission fluid.
    Filters
      Replace climate-controled seat filter (if equipped).
    Engine Oil
      Replace engine oil.
    Drive Belt
      Replace accessory drive belt(s) if not replaced within the last 100,000 miles.
    Coolant
      Replace engine coolant.
    Air Filter Element
      Replace engine air filter.
Rotate
    Tires
      Rotate tires, inspect tires for wear and measure tread depth.