Frame and Body Mounting

Frame and Body Mounting

The frame is bolted to the body and is used to:

- aid in structural support.
- provide mounting surfaces for the rear of the front suspension control arms.
- support the radiator.
- provide a mounting point for the front stabilizer bar.
- provide a mounting point for the No. 2 and No. 3 crossmembers.

The front No. 2 crossmember is bolted to the frame and is used to:

- aid in structural support.
- provide mounting surfaces for the front suspension control arms.
- provide a mounting point for the engine mounts.

The No. 3 crossmember is bolted to the frame and is used to:

- aid in structural support.
- provide mounting surfaces for the rear transmission support insulator.

For the removal and installation of the No. 3 crossmember, refer to Automatic Transaxle/Transmission - 4R70E/4R75E Service and Repair.

For frame and body dimension specifications, refer to Body Repairs .