Seat Control Switch - Redundant Front Passenger Fore/Aft, Signature L and Executive L

Seat Control Switch - Redundant Front Passenger Fore/Aft, Signature L and Executive L









Removal and Installation

1. Open the armrest, remove the 4 screws and armrest tray door assembly.

2. Remove the 2 rubber bumpers and remove the 2 screws.

3. Disengage the retaining clips, position aside the armrest tray and access the redundant seat control switch.

4. Disconnect the redundant seat control switch electrical connector.

5. Release and remove the redundant seat control switch.

6. To install, reverse the removal procedure.