Seat Armrest - Front

Seat Armrest - Front

Removal

All vehicles

1. Remove the 2 pivot screw covers.





Vehicles with the seat armrest locked in the vertical position

2. From the left side of the seat armrest, push in on the locking tab to reset the armrest impact locking pin.





All vehicles

3. Remove the pivot screw from each side and remove the seat armrest.





4. Remove the seat armrest lid.

1. Push the left latch button and open the seat armrest lid.

2. Push the check lever to reset the 2 latch buttons and partially close the seat armrest lid.

3. Push the right release button and lift the seat armrest lid assembly off.





Installation

1. Press the check lever of the seat armrest lid to reset the latch mechanism, allowing both of the latch buttons to function.





2. Press the passenger side latch button.





3. Place the seat armrest lid onto the passenger side of the seat armrest base and pull the lid toward the driver side until the lid and base have maximum engagement.





4. Engage the seat armrest lid.
- Press the check lever.

- While holding down the check lever, press the driver side latch button.

- When the seat armrest lid is engaged, a "pop" noise will be heard and the driver side button will depress.





5. Release the check lever.





6. Release the driver side latch button.





7. Drop the seat armrest lid from a 45-degree angle so that the lid closes securely.

8. Open and close the seat armrest lid 3 times from each side to make sure the lid is correctly retained.

9. Install the armrest and 2 pivot screws.





10. Install the 2 pivot screw covers.