Oil Pump Screen And Pickup Tube

Oil Pump Screen and Pickup Tube





Removal

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the oil pan. For additional information, refer to Engine Lubrication Components - Exploded View, Oil Pan, Oil Pump, Oil Pump Screen and Pickup Tube Exploded View, Oil Pan, Oil Pump, Oil Pump Screen And Pickup Tube and Oil Pan Oil Pan.

3. Remove the 3 bolts, the oil pump screen and pickup tube.
- Discard the O-ring seal.

Installation

1. NOTICE: Make sure the O-ring is in place and not damaged. A missing or damaged O-ring can cause foam in the lubrication system, low oil pressure and severe engine damage.

NOTE: Clean and inspect the mating surfaces and install a new O-ring. Lubricate the O-ring with clean engine oil prior to installation.

Position the oil pump screen and pickup tube and install the bolts.

- Tighten the oil pump screen and pickup tube-to-oil pump bolts to 10 Nm (89 lb-in).

- Tighten the oil pump screen and pickup tube-to-spacer bolt to 25 Nm (18 lb-ft).

2. Install the oil pan. For additional information, refer to Engine Lubrication Components - Exploded View, Oil Pan, Oil Pump, Oil Pump Screen and Pickup Tube Exploded View, Oil Pan, Oil Pump, Oil Pump Screen And Pickup Tube and Oil Pan Oil Pan.