Removal and Replacement

Footwell Duct - Rear

Removal and Installation

1. Remove the front seats. For additional information, refer to Seating Seat - Front.

2. Remove the RH lower A-pillar trim panel.





3. Remove the RH front safety belt anchor bolt.
- To install, tighten to 40 Nm (30 lb-ft).





4. Remove the RH lower B-pillar finish panel.





5. Position the carpet away from the rear footwell duct.

6. Detach the wire harness from the rear footwell duct.





7. Remove the rear footwell duct pin-type retainer and the rear footwell duct.





8. To install, reverse the removal procedure.