Battery Tray

Battery Tray

Removal and Installation

1. Remove the battery. For additional information, refer to Battery Battery.

2. Loosen the 2 bolts and position the Battery Junction Box (BJB) aside.
- To install, tighten to 12 Nm (106 lb-in).

3. Remove the 4 bolts and the battery tray.
- To install, tighten the radiator support and inner fender bolts to 12 Nm (106 lb-in).

- To install, tighten the apron shield bolt to 4 Nm (35 lb-in).

4. To install, reverse the removal procedure.