Air Leaks

Air Leaks

1. Apply a soapy water solution to the air tubes, air tube fittings, air springs, upper spring shock mount and the air compressor.

2. NOTE: If a leak is detected within the air compressor, install a new compressor. If a leak is detected in a tube, carry out the air tube repair procedure.

Verify the location of air leak(s) and repair or install new components as necessary.


Air Tube Repair

1. Cut the tube at the damaged area.

2. Trim the sleeve material from both ends of the damaged tube.





3. Taper both ends of the tube by shaving or sanding it 3 mm (0.11 in) from the tips.





4. Install the repair filling.





5. NOTE: Check system for leaks.

Inflate the air suspension system. For additional information, refer to Ride Height Adjustments Ride Height Adjustments.