1-2 Accumulator

1-2 Accumulator

Removal

1. Compress the 1-2 accumulator cover and remove the accumulator piston retaining ring.





2. NOTE: Note the location of the 1-2 accumulator springs for reference during assembly.

Remove the 1-2 accumulator.

1. Remove the 1-2 accumulator cover.

2. Remove the inner and outer lower 1-2 accumulator spring.

3. Remove the accumulator piston.

4. Remove the upper 1-2 accumulator spring.





Installation

1. Install the 1-2 accumulator.

1. Install the 1-2 accumulator upper spring.

2. Install the accumulator piston.

3. Install the inner and outer lower 1-2 accumulator spring.

4. Install the cover and seal assembly.





2. Compress the accumulator and install the accumulator piston retaining ring.