Active Park Assist

Active Park Assist

The active park assist system consists of the following:

- Active park assist switch (located in the center console on the selector lever trim panel)

- Two long range ultrasonic active park assist sensors (located in the sides of the front bumper cover)

- Parking Aid Module (PAM) (located under the left side parcel shelf)

- Eight ultrasonic parking aid sensors (4 located in the front bumper cover and 4 located in the rear bumper cover)

- Front parking aid speaker (located on the hush panel assembly below the glove compartment)

- Rear parking aid speaker (located under the left side parcel shelf)

- Instrument Panel Cluster (IPC)

- Power Steering Control Module (PSCM) (part of the Electronic Power Assist Steering (EPAS) system located on the steering gear assembly)

- Steering Angle Sensor Module (SASM) (mounted to the steering column)

- ABS module

- PCM

- HVAC module

- Multifunction switch

The active park assist system is a supplementary park aid that assist the operator in detecting an available parallel parking space and automatically steering the vehicle into the space while the operator control the accelerator, gearshift and brakes.

The system visually and/or audibly instruct the operator to park the vehicle through the messages in the IPC (Instrument Panel Cluster) message center and/or warning chimes. The parking aid system is utilized for detecting the space in front and to the rear of the vehicle when driving forward or backing up.