Seat Backrest - Rear

Seat Backrest - Rear









Removal and Installation

1. Remove the rear seat cushion. For additional information, refer to Seat Cushion- Rear .

2. Disconnect the heated seat electrical connector.

3. Pull the safety belts out through the slots of the LH and RH safety belt guides.

4. Remove the 2 backrest mounting nuts.
- To install, tighten to 48 Nm (35 lb-ft).


5. Slide the backrest up, disengaging the 3 backrest frame upper retainers from the package tray sheet metal.

6. Slide the backrest out from under the safety belts and remove the backrest.

7. To install, reverse the removal procedure.
- Make sure all safety belts and buckles are accessible to the occupants.