Instrument Panel, Gauges and Warning Indicators: Service and Repair

Message Center Configuration

Oil Life Reset - Non-Hybrid

NOTE: The oil life calculation is set at a maximum of approximately 12,070 km (7,500 miles) or 180 days (non-hybrid) or 16,093 km (10,000 miles) (hybrid).

1. Press and release the SETUP button 2 times to display OIL LIFE XXX% HOLD RESET = NEW.

2. Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%.

Oil Life Start Value - Non-Hybrid

NOTE: The oil life start value is used to reset the oil life value back to the maximum of approximately 12,070 km (7,500 miles) or 180 days if the value was previously changed, or to lower the value from the maximum (12,070 km [7,500 miles] or 180 days) in 10% increments down to 10%.

1. Press and release the SETUP button 2 times to display OIL LIFE = XXX% HOLD RESET = NEW.

2. Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%.

3. Release the RESET button then press and release the RESET button to lower the percentage by 10% (down to 10%) for each button press or return the value to 100%.

Oil Life Reset And Oil Life Start Value - Hybrid

NOTE: The oil life calculation is set at a maximum of approximately 16,093 km (10,000 miles) or 12 months.

NOTE: The message center is displayed on the LH side of the speedometer and is split into several different viewing panes.

1. Press and release the SETUP button to display VEHICLE SETTINGS in the LH viewing pane of the message center.

2. Press and release the RESET button to display the next viewing pane.

3. Press and release the SETUP button to select and highlight OIL LIFE in the LH viewing pane of the message center.

4. NOTE: Once the RESET button is pressed, the message center highlights the currently selected oil life start value. This value can be changed or left as currently selected.
Press and release the RESET button to display the move to the RH viewing pane of the message center and highlight SET TO xxx%.


5. Press and release the SETUP button to highlight the desired oil life start value.

6. NOTE: A pop-up window appears stating HOLD RESET FOR 2 SECONDS TO CONFIRM. PRESS INFO TO CANCEL.
Press and release the RESET button.


7. Press and hold the RESET button for approximately 2 seconds to select and confirm the desired oil life start value.