100000 MI or 160000 KM

Inspect
    Wheels
      Inspect wheels and related components for abnormal noise, wear, looseness or drag.
    Vehicle
      Multi-point inspection - Recomended
    Universal Joint, Drive/Propeller Shaft
      Inspect rear axle and U-joints; lubricate if equipped with grease fittings (AWD vehicles).
    Tie Rod End
    Steering and Suspension
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
    Fluid - A/T
      Inspect automatic transmission fluid level (if equipped with dipstick).
    Exhaust System
      Inspect exhaust system and heat shields.
    Drive Belt
      Inspect accessory drive belt(s).
    Cooling System
      Inspect engine cooling system strength and hoses.
    Constant Velocity Joint Boot
      Inspect half-shaft boots (if equipped).
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses, and parking brake.
    Ball Joint
Replace
    Spark Plug
      If not using special condition I.
    Oil Filter, Engine
    Engine Oil
      Change engine oil and filter.
    Coolant
      Change engine coolant. Initial replacement at six years or 100,000 miles (160,000 km), then every three years or 50,000 miles (80,000 km).
    Cabin Air Filter / Purifier
      (if equipped)
Rotate
    Tires
      Rotate tires, inspect tire wear and measure tread depth.