Front Suspension

Front Suspension

The front suspension consists of the following components:

- Wheel bearings

- Wheel hubs

- Wheel studs

- Front and rear lower arms

- Upper arms

- Stabilizer bar

- Stabilizer bar bushings

- Stabilizer bar links

- Shock and spring assemblies

- Wheel knuckles

The front suspension is an independent suspension design. This front suspension uses 3 parallel arms (one upper arm and 2 lower arms). Each arm has a mounting position to the chassis and a ball joint attachment at the wheel knuckle. The shock absorber mounts to the lower arm and along with the spring, controls vertical movement. A stabilizer bar and links are included to control suspension lean/sway during turns. The multiple arm design allows for carefully controlled motion of the wheel throughout suspension travel, controlling such parameters as camber angle, caster angle and toe.