10000 MI or 16000 KM

Inspect
    Wheels
      Inspect wheels and related components for abnormal noise, wear, loosness or drag.
    Vehicle
      Perform multi-point inspection (recommended)
    Universal Joint, Drive/Propeller Shaft
      Inspect rear axle and U-joints; lubricate if equipped with grease fittings.
    Tie Rod End
    Tie Rod Boot
    Steering and Suspension
      Inspect steering linkage, ball joint, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
    Fluid - A/T
      Inspect automatic transmission fluid level (if equipped with dipstick).
    Exhaust System
      Inspect exhaust system and heat shields.
    Cooling System
      Inspect engine cooling system and motor/electronics cooling system stength and hoses.
    Constant Velocity Joint Boot
      Inspect half-shaft boots (if equipped).
    Cabin Air Filter / Purifier
      Inspect cabin air filter (if equipped). Inspect cabin air filter if using Special Operating Condition I (if equipped).
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses and parking brake.
    Ball Joint
    Air Filter Element
      Inspect engine air filter if using Special Operating Condition I (if equipped).
Replace
    Oil Filter, Engine
    Engine Oil
      Change engine oil and filter.
Rotate
    Tires
      Rotate tires, inspect tire wear and measure tread depth.