B00B5:1D

Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS)

Refer to Wiring Diagram Set 46 for schematic and connector information. [1][2]Diagrams By Number





Pinpoint Test - Supplemental Restraint System (SRS)

Pinpoint Test Y: DTCs B00B5:11, B00B5:12, B00B5:13 and B00B5:1D

Refer to Wiring Diagram Set 46, Supplemental Restraint System for schematic and connector information. [1][2]Diagrams By Number

Normal Operation
The Restraints Control Module (RCM) monitors the driver seat track position sensor and circuits for the following faults:

- Short to ground
- Short to voltage
- Open circuit
- Current out of range
- Faulted driver seat track position sensor
If a fault is detected, the RCM (Restraints Control Module) will store DTC B00B5:11, B00B5:12, B00B5:13 or B00B5:1D in memory and send a message to the Instrument Panel Cluster (IPC) to illuminate the air bag warning indicator.





This pinpoint test is intended to diagnose the following:

- Wiring, terminals or connectors
- Driver seat track position sensor
- RCM (Restraints Control Module)