Front Door: Service and Repair

Door

NOTE: Front door shown, rear door similar.









Removal and Installation

1. Remove the door check arm-to-body bolt.
- To install, tighten to 25 Nm (18 lb-ft).


2. NOTICE: To avoid damaging the door, this step requires an assistant.

NOTE: To minimize the possibility of cross threading, hand start all fasteners during the installation.
Mark the position of each hinge and remove the hinge-to-door bolts.
- To install, tighten to 30 Nm (22 lb-ft).


3. Remove the front door.

4. To install, reverse the removal procedure.
- If necessary, align the door. For additional information, refer to Door Alignment- Front Door Alignment - Front or Door Alignment- Rear Adjustments.