30000 MI or 48000 KM

Inspect
    Wheels
      Inspect wheels and related components for abnormal noise, wear, looseness or drag.
    Vehicle
      Multi-point inspection - Recomended
    Universal Joint, Drive/Propeller Shaft
      Inspect rear axle and U-joints; lubricate if equipped with grease fittings (AWD vehicles).
    Tie Rod End
    Steering and Suspension
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
    Exhaust System
      Inspect exhaust system and heat shields.
    Cooling System
      Inspect engine cooling system strength and hoses.
    Constant Velocity Joint Boot
      Inspect half-shaft boots (if equipped).
    Cabin Air Filter / Purifier
      (if equipped)
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake linings, hoses, and parking brake.
    Ball Joint
Replace
    Oil Filter, Engine
    Fluid - A/T
      Change automatic transmission fluid if using Special Operating Conditions T, I, D.
    Filters
      Replace climate-controlled seat filter (if equipped).
    Engine Oil
      Change engine oil and filter.
    Air Filter Element
      Replace engine air filter.
Rotate
    Tires
      Rotate tires, inspect tire wear and measure tread depth.