Installation

Fig. 9 Radius Arm Replacement. 4x2 Models:

1. Install the retainer and inner insulator on the radius arm. Move the radius arm and axle assembly so the radius arm is inserted through the bracket.
2. Install the spacer, outer insulator (the shield on the right side), washer, and nut. Torque the nut to 109 - 163 Nm (81 - 120 ft.lbs).
3. Torque the upper shock bolt to 34 - 47 Nm (25 - 35 ft.lbs).

NOTE: Lower the vehicle on its wheels or support the vehicle at the front springs prior to torquing the axle pivot bolt and nut.

4. Torque the axle pivot bolt and nut to 163 - 203 Nm (120 - 150 ft.lbs).