Clutch - Gear Grinding or Weak Pedal Feel

Bulletin No. 002/92
Issued 7/14/92
Revised

Category
H

Applicable Model/s
1991 Navajo
M/T only

Subject
CLUTCH SLAVE CYLINDER LEAKAGE

DESCRIPTION

Gear grinding or a weak clutch pedal feel may be caused by a leaking clutch slave cylinder. This may be caused from operating vehicles in muddy or dusty environments, or when operating after extensive storage time.

Verify that the clutch slave cylinder is leaking by checking for fluid inside the bottom of the clutch housing. This can be accomplished by removing the housing cover and inspecting with a flashlight.





REPAIR PROCEDURE

Refer to Workshop Manual, Section H, for the following repairs.

1. Remove the clutch slave cylinder.

2. Replace with a new clutch slave cylinder (ZZL1 16 540A).

PARTS INFORMATION

PART NUMBER DESCRIPTION

ZZL1 16 540A Slave Cylinder

WARRANTY INFORMATION

(Applies to vehicles covered under warranty.)

Warranty Type Code:
A

Customer Comment Code:
24

Damage Code:
91

Part No. of Main Cause:
ZZL1 16 540A

Quantity:
1

Operation No:
H0302XRX

Labor Hour:
4.0 Hrs.