Camshaft, Engine

Lobe Lift:
Allowable Lobe Lift Loss 0.005
Theoretical Valve Lift @ Zero Lash:
Intake 0.4024
Exhaust 0.4024
End Play 0.065 - 0.165 mm (0.025 - 0.064 inch)
Thrust Plate Thickness 0.058 - 0.159
Journal to Bearing Clearance 0.001 - 0.0026
Service Limit 0.006
Bearing Outside Diameter 0.158 - 0.159
No.1 49.57 - 49.59 mm (1.951 - 1.952 inch)
No.2 49.21 - 49.23 mm (1.937 - 1.938 inch)
No.3 48.83 - 48.85 mm (1.922 - 1.923 inch)
No.4 48.44 - 48.46 mm (1.907 - 1.908 inch)
Runout 0.127 (0.05) Max. T.I.R.
Out Of Round 0.0076 mm (0.0003 inch) Max. T.I.R.
Bearing Inside Diameter:
No.1 49.635 - 49.655 mm (1.954 - 1.955 inch)
No.2 49.255 - 49.275 mm (1.939 - 1.940 inch)
No.3 48.750 - 48.768 mm (1.919 - 1.920 inch)
No.4 48.875 - 48.895 mm (1.924 - 1.925 inch)
Front Bearing Location 0.040 - 0.060 (e)


(e) Distance in inches that front edge of bearing is installed below front face of cylinder block.