Charging System: Specifications
Charging System Specifications| Positive Voltage | Above 12.4 V | |
| Dark Current | Below 0.05 A | |
| Test Load | one half of the rated Cold Cranking Amps At 27 degrees C (80 degrees F). | |
| Battery Voltage With Load | ||
| Approximate Battery Temperature | Minimum Voltage (V) | |
| 27 degrees C (80 degrees F). | 9.6 | |
| 21 degrees C (70 degrees F). | 9.6 | |
| 16 degrees C (60 degrees F). | 9.5 | |
| 10 degrees C (50 degrees F). | 9.4 | |
| 4 degrees C (40 degrees F). | 9.3 | |
| -1 degrees C (30 degrees F). | 9.1 | |
| -7 degrees C (20 degrees F). | 8.9 | |
| -12 degrees C (10 degrees F). | 8.7 | |
| -18 degrees C (0 degrees F). | 8.5 | |
| Slow Charging | 2 hours at 20 A | |
| Slow Charging for a full state of charge. | 3-5 Amps over several hours. | |
| Quick Charging | 20 Minutes at 35 A | |
| Generator | ||
| Regulator Type | Voltage regulator, on housing | |
| Drive Belt Tension | ||
| 2.3L | 3.0L | 4.0L |
| Automatic Tensioner Automatic Tensioner indicator must fall between 4 degrees and 25 degrees markings on belt tensioner | Automatic Tensioner Automatic Tensioner indicator must fall between 4 degrees and 19 degrees markings on belt tensioner | Automatic Tensioner |
| Generator Terminal Voltage | ||
| Terminal | Ignition ON (V) | Idle (V) |
| B | B+ | 14.1-14.7 |
| I | Approximately 1 | 13.2-13.8 |
| A | B+ | 14.1-14.7 |
| S | ----------------- | 6.6-6.9 |
| System Output Current | 95 A or more at 2000 RPM |