Pinpoint Test 12

PINPOINT TEST 12: LH TURN SIGNAL INDICATOR IS NEVER ON

Step 1-Step 3:

Step 4:

Normal Operation
When the multifunction switch is in the LH TURN position, voltage is sent from the multifunction switch to the instrument cluster through circuit V/W), and the LH turn signal indicator flashes on and oft. The instrument cluster provides the bulb ground through circuit (B/Y).

Possible Causes
- Bulb
- Circuit (B/V) open
- Circuit (V/W) open
- Instrument cluster

CAUTION: Use the correct probe adaptor(s) when making measurements. Failure to use the correct probe adaptor(s) may damage the connector.