Front Door Panel: Service and Repair

DOOR TRIM PANEL - FRONT

NOTE:






Removal and Installation

1. Remove the 2 front door switch panel screws.






2. Remove the front door switch panel.
- Lift the front door switch panel upward to release the front door switch panel retaining clips.
- If equipped, disconnect the electrical connectors.
- Remove the wire harness pin-type retainer.

3. Remove the front door trim finish panel.
- Pull the front door trim finish panel outward to release the front door trim finish panel retaining clips.






4. Remove the interior door handle bracket.
- Remove the 2 interior door handle bracket screws.






5. Remove the 2 front door trim panel screws.

CAUTION: Do not pull directly outward on front door trim panel, as damage will occur.

6. Remove the front door trim panel screws.
- Lift upward to remove the front door trim panel.

7. To install, reverse the removal procedure.