Front Door: Service and Repair

DOOR






Removal and Installation
1. Disconnect the battery.
2. Disconnect the wiring harness electrical connector.
3. Remove the upper and lower hinge access cover plates, it equipped.
- Mark the location of each hinge on the door.
- Mark the location of each hinge on the body.






4. Support the door.
5. Remove the 2 front door-to-lower hinge bolts.
- To install, tighten to 30 N-m (3.1 kgf-m, 22 ft-lbf).






6. Remove the 2 front door-to-upper hinge bolts.
- To install, tighten to 30 N-m (3.1 kgf-m, 22 ft-lbf).

7. Remove the hinge.
8. To install, reverse the removal procedure.
- Inspect the door adjustment.