Operation CHARM: Car repair manuals for everyone.
Home >> Mazda Truck >> 2007 >> B3000 V6-3.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Cooling System >> Testing and Inspection >> Component Tests and General Diagnostics >> Pressure Testing

Pressure Testing

RADIATOR PRESSURE TEST INSPECTION - 3.0L
1. Remove the radiator cap. Fill the radiator as needed. Connect a radiator tester (commercially available) to the radiator filler neck.

Caution: Do not pressurize the cooling system beyond 138 kPa (20.0 psi).

2. Pump the cooling system to a maximum of 138 kPa (20.0 psi) and hold for 2 minutes. If the pressure drops within this time, inspect for leaks and repair as required.
pro multis · About Operation CHARM