Removal and Replacement

MANUAL TRANSMISSION OIL REPLACEMENT
1. Remove the drain plug and washer.





2. Drain the oil into a suitable container.
3. Install a new washer and the drain plug.





4. Remove the oil level plug with washer and add the specified amount and type of oil through the oil level plug hole until the level reaches the bottom of the oil level plug hole.





Specified oil grade:
MERCON or M-III
Capacity:
2.65 liters (5.6 US pt, 4.7 Imp pt)

5. Install a new washer and the oil level plug.

Tightening torque
48 Nm (4.894 kgf-m, 35 ft-lbf)