System Specifications

AUTOMATIC TRANSMISSION SPECIFICATIONS

General Specifications:

1 Approximate dry capacity, includes cooler and lines. Fluid level indicator should be used to determine actual fluid requirements and fluid specification. Check the level at normal operating temperature. DO NOT OVERFILL if it is necessary to add or replace fluid.

End Play Specifications (5R55E 5R44E) (Part 1):

End Play Specifications (5R55E 5R44E) (Part 2):

Torque Converter End Play Specifications (5R55E 5R44E):

Band Adjustment And Torque Chart (5R55E 5R44E):

Clutch Plate Usage And Clearance Specifications (5R55E 5R44E):

Selective Snap Rings (5R55E 5R44E):

Service Identification Model Chart (5R55E 5R44E):

Band/Clutch Application Chart (5R55E 5R44E):

FLYWHEEL
Install four new torque converter to flywheel nuts.
Tightening Torque 35 Nm (3.6 kgf-m, 26 ft-lbf)


OIL PAN





Loosely install the 18 transmission oil pan bolts.
Tighten the oil pan bolts.
Use a crisscross sequence to tighten the oil pan bolts.