Tightening Torque and Sequence

Cylinder Head





USE NEW BOLTS

Install the 12 mm (0.47 inch) bolts and tighten in the sequence shown.





Tighten the eight 12 mm (0.47 inch) bolts in two stages in the sequence shown.
Stage 1 Tighten the bolts 80 degrees.
Stage 2 Tighten the bolts an additional 80 degrees.





Install the two 8 mm (0.31 inch) bolts.






Intake Manifold


Crankshaft Pulley
Using the special tool, install a new crankshaft pulley bolt. Tighten the bolt in two stages.
Stage 1 Tighten the bolt to 50 Nm (37 ft. lbs.)
Stage 2 Tighten the bolt an additional 90 degrees.


Flexplate





Tighten the bolts in the sequence shown in two stages.
Stage 1 Tighten the bolts to 13 Nm (1.3 kgf-m, 10 ft. lbs.)
Stage 2 Tighten the bolts to 71 Nm (7.1 kgf-m, 52 ft. lbs.)


Flywheel





Tighten the bolts in the sequence shown in two stages.
Stage 1 Tighten the bolts to 13 Nm (1.3 kgf-m, 10 ft. lbs.)
Stage 2 Tighten the bolts to 71 Nm (7.1 kgf-m, 52 ft. lbs.)






Water Pump