Assembly Note
Assembly Note1. Install the No. 2 front/overdrive planetary thrust bearing.
Note:
^ Thoroughly clean all parts and blow dry with moisture free compressed air.
^ Use petroleum jelly to hold the front/overdrive planetary thrust bearing (No. 2) in place.
2. Install the front/overdrive planetary gear carrier into the center shaft and front ring gear.
Caution:
^ Use care not to bend or damage the trigger wheel.
^ The alphanumeric stamping on the overdrive clutch adapter must face toward the overdrive sun gear or the coast clutch assembly will not fit into the transmission.
3. Install the front/overdrive sun gear.
1) Install the front/overdrive sun gear.
2) Install the coast clutch to front/overdrive carrier adapter.
