On-Board Diagnostic [BCM]

DTC INSPECTION [BCM]






1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- When using the IDS (notebook PC)
- Select the "Toolbox" tab.
- Select "Self Test".
- Select "Module".
- Select "GEM".

- When using the PDS (pocket PC)
- Select "Module Tests".
- Select "GEM".
- Select "Self Test".

3. Verify the DTC according to the directions on the screen.
- If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.

4. After completion of repairs, clear all DTCs stored in the BCM.