Lower Panel Removal/Installation
LOWER PANEL REMOVAL/INSTALLATIONDriver's Side
1. Remove the following parts:
1. Front scuff plate inner (driver's side)
2. Front side trim (driver's side)
3. Console panel
4. Console
5. Hood release lever
2. Remove the screws.
3. Pull the lower panel outward and detach clips A.
4. Remove the passenger compartment temperature sensor.
5. Disconnect the headlight leveling switch connector and TCS OFF switch connector.
6. Remove the lower panel.
7. Install in the reverse order of removal.
Passenger's Side
1. Remove the following parts:
1. Front scuff plate inner (passenger's side)
2. Front side trim (passenger's side)
3. Console panel
4. Console
5. Glove compartment
2. Remove the screws.
3. Pull the lower panel outward and detach clips A.
4. Remove the lower panel.
5. Install in the reverse order of removal.