Operation CHARM: Car repair manuals for everyone.
Home >> Mazda Truck >> 2008 >> CX-7 FWD L4-2.3L Turbo >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> PID/Data Monitor and Record Procedure

PID/Data Monitor and Record Procedure

PID/DATA Monitor and Record Procedure

NOTE: The PID/DATA MONITOR function monitors the calculated value of the input/output signals in the PCM. Therefore, an output device malfunction is not directly indicated as a malfunction of the monitored value for the output device. If a monitored value of an output device is out of specification, inspect the monitored value of the input device related to the output control.




1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- When using the IDS (notebook PC)
1. Select the "Toolbox" tab.
2. Select "DataLogger".
3. Select "Module".
4. Select "PCM".

- When using the PDS (pocket PC)
1. Select "Module Tests".
2. Select "PCM".
3. Select "DataLogger".

3. Select the PID from the PID table.
4. Verify the PID data according to the directions on the screen.
pro multis · About Operation CHARM