B106A
PINPOINT TEST 4: DTC B106A - PRESSURE SENSOR RANGE BIT INCORRECT STATE
Normal OperationIf there is a fault in the tire pressure monitoring system (TPMS), such as a damaged or missing sensor(s), damaged module or a communication issue within the vehicle, DTCs are set in the smart junction box (SJB), the TPMS warning indicator will flash for 70 seconds and then remain ON solid when the ignition switch is turned to the ON position and the message center (if equipped) will display TIRE PRESSURE SENSOR FAULT.
- B106A Pressure Sensor Range Bit Incorrect State - When an attempt has been made to train a non-compatible sensor, the SJB will set DTC B106A.
This pinpoint test is intended to diagnose the following:
- Tire pressure sensor(s)
- Incorrect tire pressure sensor(s) installed
- SJB
