C1230

-
PINPOINT TEST 3: DTCS C1145, C1155, AND C1230 - WHEEL SPEED SENSOR CIRCUIT FAILURE

Normal Operation

The wheel speed sensor and the wheel speed sensor ring generate a signal that is sent to the anti-lock (ABS) module. The wheel speed sensor circuitry connects to the ABS module connector through 2 wires and a connector at each wheel speed sensor. When the ignition is turned to the RUN position, the ABS module carries out a self-test by sending a reference voltage through the wheel speed sensors and their circuitry to determine if they are functional.

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Wheel Speed Sensor
- ABS module

CAUTION:Use the Flex Probe Kit for all test connections to prevent damage to the wiring terminals. Do not use standard multimeter probes.

Step 1:

Step 2:

Step 3-Step 4:

Step 5-Step 6: