Wheel Speed Sensor - Rear
-
WHEEL SPEED SENSOR - REAR
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. See Lifting.
2. Disconnect the negative battery cable. See Procedures.
3. Disconnect the wheel speed sensor electrical connector.
4. Remove the wheel speed sensor bolt and the wheel speed sensor.
- To install, tighten to 27 Nm (2.8 kgf-m, 20 ft-lbf).
5.
NOTE:Plug the sensor cavity and thoroughly clean the sensor mounting surface.
NOTE:Inspect the anti-lock brake sensor O-ring for damage; lightly lubricate the O-ring with axle lubricant.
To install, reverse the removal procedure.