Ball Joint: Service and Repair

BALL JOINT - LOWER 2WD









Removal

1. Remove the wheel spindle. See Service and Repair.






1. Remove and discard the lower ball joint snap ring.






1. Using a suitable ball joint remover tool, remove the ball joint.

Installation

1.






CAUTION:Do not damage the lower ball joint boot when installing the tool.
NOTE:Clean and inspect the lower arm ball joint bore for damage before installing a new ball joint.
NOTE:Make sure the new lower ball joint snap ring is fully seated.
NOTE:Always install new nuts and cotter pins.Using a suitable ball joint installation tool, install the lower ball joint.

2. Install the wheel spindle. See Service and Repair.