Front Door: Service and Repair

DOOR









Removal and Installation

1. Disconnect the battery. See Procedures.

2. Disconnect the wiring harness electrical connector.

3. Remove the upper and lower hinge access cover plates, if equipped.

- Mark the location of each hinge on the door.
- Mark the location of each hinge on the body.






4. Support the door.

5. Remove the 2 front door-to-lower hinge bolts.

- To install, tighten to 30 N-m (3.1 kgf-m, 22 ft-lbf).

6.




Remove the 2 front door-to-upper hinge bolts.

- To install, tighten to 30 N-m (3.1 kgf-m, 22 ft-lbf).

7. Remove the hinge.

8. To install, reverse the removal procedure.

- Inspect the door adjustment. See Adjustments.