Tailgate Release Handle: Service and Repair

TAILGATE RELEASE HANDLE

Removal and Installation

1. Remove the 8 screws and the tailgate access cover.

- To install, tighten to 5 N-m (0.5 kgf-m, 44 in-lbf).

2. Open the clips and disconnect the tailgate latch actuating rods from the remote control.

3. Remove the tailgate latch remote control nuts.

- To install, tighten to 12 Nm (1.2 kgf-m, 9 ft-lbf).

4. Remove the tailgate release handle.

5. To install, reverse the removal procedure.