Camshaft End Play Inspection

Camshaft End Play Inspection
1. Remove the roller followers.
2. Use Dial Indicator with Bracketry SST 100-002 or equivalent to measure camshaft endplay.
3. Position the camshaft to the rear of the cylinder head.
4. Zero the indicator.
5. Move the camshaft to the front of the cylinder head. Note and record the camshaft endplay.





1) If camshaft endplay exceeds specification, refer to specifications. Install a new camshaft and recheck endplay.
2) If camshaft endplay exceeds specification after camshaft installation, install a new cylinder head.