Hood: Service and Repair

HOOD REMOVAL/INSTALLATION

WARNING:
- Removing the hood without supporting it could cause the hood to fall and cause serious injury. Always perform the procedure with at least another person to prevent the hood from falling.

1. Disconnect the negative battery cable.

2. To remove the hood hinges, remove the following parts:
a. Windshield wiper arm and blade. (See Windshield Wiper Arm And Blade Removal/Installation)

b. Cowl grill. (See Cowl Grille Removal/Installation)

c. Front bumper. (See Removal and Replacement)

d. Front combination lights. (See Front Combination Light Removal/Installation)

e. Side step molding. (See )

f. Front fender panel. (See Service and Repair)

3. Remove in the order indicated in the table.










4. Install in the reverse order of removal.

5. Adjust the hood. Adjustments