Keyless Entry: Service and Repair

SECURITY ACCESS PROCEDURE

1. Connect the M-MDS to DLC-2.






2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

- When using the IDS (laptop PC)

- Select "Body".
- Select "Security".
- Select "PATS Functions".

- When using the PDS (Pocket PC)

- Select "Programming".
- Select "PATS Functions".

3. Select the items to be performed from the following:

- "Program Additional card key"
- "Card Key Code Erase and Program"
- "Steering Lock Unit Programming"
- "Program additional ignition key"
- "Ignition Key Code Erase and Program"
- "Customer Spare Key Programming Enable"
- "Customer Spare Key Programming Disable"
- "Parameter Reset"

4. The security access begins and the M-MDS displays the "OUT-CODE".
NOTE:
- When "OUT-CODE" is first displayed, turning the ignition switch from the LOCK to the ON position 5 times will change the "OUT-CODE".

5. Input "IN-CODE" corresponding to "OUT-CODE" displayed on the M-MDS screen.

6. If the security access is successful, selected item can be performed.