Front Seat Disassembly/Assembly

FRONT SEAT DISASSEMBLY/ASSEMBLY

WARNING:
- Handling the front seats improperly can accidentally deploy the side air bag, which may seriously injure you. Read AIR BAG SYSTEM SERVICE WARNINGS before handling the front seats. (See Air Bag System Service Warnings) (See Air Bag System Service Cautions)

CAUTION:
- If any of the following work is performed, perform the seat weight sensor calibration using the M-MDS. (See )

- Replacement with a new seat weight sensor
- Replacement with a new seat weight sensor control module
- Replacement with new passenger's side parts
- Disassembly of the passenger's side

- If any of the following work is performed, perform the seat weight sensor inspection using the M-MDS. (See Component Tests and General Diagnostics)

- Removal of the passenger's side
- Loosening and retightening of passenger's seat fixing bolts

1. Disconnect the negative battery cable and wait for more than 1 minute.

2. Disassemble in the order indicated in the table.

3. Assemble in the reverse order of disassembly.

Driver's Seat (Manual Seat)










Driver's Seat (Power Seat)










Lumber support lever disassembly note

1. Remove the pin from the lumber support lever installation part with rag.






Passenger's Seat