A/C Operation Check Mode Display
A/C OPERATION CHECK MODE DISPLAY
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- When using the IDS (laptop PC)
1 Select "Body" tab.
- When using the PDS (Pocket PC)
1 Select "All Tests and Calibrations".
3. Select the "EATC Operation Check" from the screen menu.
4. Verify the A/C operation check mode according to the directions on the screen.
A/C OPERATION CHECK MODE TABLE
*
Shown on the information display (at the set temperature display) according to each M-MDS display.