Removal and Replacement

INSTRUMENT CLUSTER REMOVAL/INSTALLATION

CAUTION:
- When replacing the instrument cluster, the configuration procedure must be performed before removing the instrument cluster. Replacing the instrument cluster without performing the configuration procedure will result in system malfunction.

1. Perform the instrument cluster configuration when replacing it. Programming and Relearning

2. Disconnect the negative battery cable.

3. Remove the following parts:
a. Front scuff plate inner (driver's side) Front Scuff Plate Removal/Installation

b. Front side trim (driver's side) Front Side Trim Removal/Installation

c. Console panel Console Panel Removal/Installation

d. Console Console Removal/Installation

e. Hood release lever Service and Repair

f. Lower panel Lower Panel Removal/Installation

g. Meter hood Meter Hood Removal/Installation

4. Remove in the order indicated in the table.










5. Install in the reverse order of removal.

6. When replacing the instrument cluster of vehicles with the immobilizer system, perform the following procedure:

- See Keyless Entry System.

CAUTION:
- The removed instrument cluster should be placed with the display side up to prevent grease from leaking from the meters.