Component Tests and General Diagnostics

AUTO LIGHT CONTROL MODULE INSPECTION

1. Measure the voltage at the auto light control module terminals as indicated below.

2. Disconnect the auto light control module connector before inspecting for continuity at terminals 1K, 2A, 2O and 2P.

- If not as specified, inspect the parts listed under "Action."

- If the parts and wiring harnesses are okay but the system still does not work properly, replace the auto light control module.

Terminal Voltage List (Reference)

Terminal Voltage List (Reference) (Part 1):

Terminal Voltage List (Reference) (Part 2):

Terminal Voltage List (Reference) (Part 3):

*
For vehicles with DRL only.