Front Stabilizer Removal/Installation

FRONT STABILIZER REMOVAL/INSTALLATION

1. Remove the side cover and under cover.

2. Drain the power steering fluid. Initial Inspection and Diagnostic Overview

3. Remove the transverse member. Transverse Member Removal/Installation

4. Remove the front crossmember component. Front Crossmember Removal/Installation

5. Remove in the order indicated in the table.

6. Install in the reverse order of removal.










Front Stabilizer Installation Note

1. Install the stabilizer bar so that the identification mark is on the left side of the vehicle.






Stabilizer Bushing Installation Note

1. Align the outer side of the positioning plate with the stabilizer bushing.






Stabilizer Bracket Installation Note

1. Install the stabilizer bracket so that the arrow is pointed to the front.