Lighting - Bugs Inside Of Rear Combination Lamps

Bulletin No.: 09-036/08

Last Issued: 10/17/2008

Subject:
BUGS IN REAR COMBINATION LIGHT

APPLICABLE MODEL(S)/VINS
2007-2009 CX-7

DESCRIPTION





Some vehicles may exhibit bugs entering the rear combination light through a hole on the back side of the light.

Customers having this concern should have their vehicle repaired using the following repair procedure.

REPAIR PROCEDURE

1. Verify customer concern.

2. Remove rear combination light according to Workshop Manual (section 09-18 REAR COMBINATION LIGHT REMOVAL/INSTALLATION).

3. Attempt to remove bug(s) from inside light.

- If bug(s) can be removed, install a newly established (enlarged) gasket onto rear of combination light before re-installing light.

- If bug(s) cannot be removed, order a replacement rear combination light and install a newly established (enlarged) gasket onto rear of combination light before installing new light.

4. Gasket Installation:





a. Cut off pad at back of rear combination light.





b. Attach gasket to rear combination light.





5. Repeat Steps 2 - 4 on opposite side combination light.

6. Verify repair.





PART(S) INFORMATION





WARRANTY INFORMATION





Disclaimer